嵌入式電腦 | Embedded Computing | 展嘉科技 SYS-DBOX - 展嘉科技
Netio Technologies Co., Ltd
展嘉科技

嵌入式電腦 | Embedded Computing | 展嘉科技 SYS-DBOX

SYS-DBOX

D-BOX

產品特色

支援 RS232/RS422/RS485

具有可擴充性

防震動功能

寬壓輸入 DC12V~48V

16x Digital I/O

無線控制

產品規格

Model Name SYS-BDOX
Analog InputResolution16-Bit
Number of channels4 differential (simultaneous-sampling)
Maximum sampling rate2MS/s per channel
Programmable gain1, 5
Input range (Voltage)± 10 V, ± 2 V
Offset error± 1mV (gain=1)
± 0.2mV (gain=5)
Gain errorTypical: ± 0.01% of FSR (gain=1 & 5) Maximum: ± 0.02% of FSR (gain=1 & 5)
-3dB Bandwidth600 kHz
CMRR (fin=1 kHz)80 dB (gain=1)
90 dB (gain=5)
SFDR (fin=10 kHz)98 dB (gain=1 & 5)
SINAD (fin=10 kHz)89 dB (gain=1 & 5)
THD (fin=10 kHz) -100 dB (gain=1 & 5)
SNR (fin=10 kHz)89 dB (gain=1 & 5)
ENOB (fin=10 kHz)14.3-bit (gain=1 & 5)
FIFO buffer size256M Samples
Trigger sourcesSoftware, external digital, analog trigger ( from one analog input channel)
Trigger modePost trigger, pre-trigger, delay trigger, middle trigger, gate trigger, post or delay trigger with re-trigger
External A/D conversion sourceYes (from CONV)
Input couplingDC
Overvoltage protectionPower on: ± 35 V Power off: ± 15V
Input impedance1 GΩ
Data transferProgrammed I/O, continuous (USB bulk transfer mode)
Function I/OMode*Digital I/O, general timer/counter, pulse generation
Digital I/O8 DI / 4 DO (TTLLVTTL level)
General timer/counterTwo 32-bit, base clock: 80 MHz, external to 10 MHz
Pulse generationTwo PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; duty cycle: 1%-99%)
General SpecificationsInterfaceUSB 2.0 high speed
I/O connectorTwo 20-pin removable screw terminals
Operating temperature0 to 55°C (32 to 131°F)
Storage temperature-20 to 70°C (-4 to 158˚F)
Relative humidity5 to 95% non-condensing
Power requirements5V@ 500 mA (USB bus powered)

產品說明

可透過WIFI & 4G Modem 進行無線通訊。

高達16個數位I/O,可藉由展嘉提供的軟體操作。

具有可擴充性與防震動功能,使用上更為便利。

更多嵌入式系統,

LOGO圖示-NETIO

展嘉科技股份有限公司

Your Best Design Partner !